ROCKVANTA - Mini skid steer and attachment enquiry checklist

Complete what you know. Missing information can remain an open question.
This is a purchasing checklist, not an operating instruction or compatibility approval.

YOUR JOB
Task and material:
Working load and load position:
Working cycle / continuous tool use / combined travel and lift:
Receiving or working point (height, horizontal position, approach):
Access width, corners and overhead restrictions:
Surface, uneven ground and slopes:
Transport arrangement and weight limits:
Quantity and destination:

MACHINE - EXACT MODEL AND CONFIGURATION
Model and configuration sheet / manual revision:
Capacity value, ORIGINAL LABEL, units and applicable conditions:
Attachment and load position covered by that rating:
Mounting and locking drawing:
Auxiliary flow and pressure (units and conditions):
Couplers, return arrangements and controls:
Lift, reach and working dimensions with the proposed tool:

ATTACHMENT - EXACT MODEL AND REVISION
Model plate / technical sheet / manual:
Mounting dimensions and locking arrangement:
Tool weight and load-centre information:
Required flow and pressure range (units):
Couplers and flow direction:
Return / case-drain / electrical / control requirements, if specified:
Tool dimensions in its working position:

ASK THE SUPPLIER TO CONFIRM
Mechanical fit and locking:
Hydraulic and control match for the working cycle:
Working capacity and clearance at the intended position:
Included tool, adapter or connection kit:
Agreed checks and documents:
Service information and replacement parts included or quoted separately:
Unresolved points before ordering:

Keep EHY0.5, EHY1.0 and ELT450L model records separate.
The ELT450L brochure label "Maximum payload 450 kg" must not be changed
to rated operating capacity or applied to another model without clarification.

Send relevant details and attachments using the RFQ form, or email:
sales@rockvanta.com