ROCKVANTA | PIN AND BUSHING ENQUIRY CHECKLIST

Fill in what you know. Mark unknown items "to be confirmed".
Attach controlled drawings where available; keep worn-part measurements separate.

PART REFERENCE
Part / machine / serial or parts-book reference:
Drawing number and revision:
Quantity:
Parts included (pin / bushing / retainers / other):
Parts to be reused and their condition:

INTERFACES
Units:
Pin diameter and tolerance:
Bushing bore and tolerance:
Bore measurement condition (before / after installation):
Bushing outside diameter and tolerance:
Housing bore and tolerance:
Working length, end projection and axial location:
Lubrication holes / grooves / retention features:
Measurement source and location for each field:
Open dimensions requiring confirmation:

MATERIAL AND HARDENING
Part and drawing:
  Part number, drawing revision and the component being treated.
  Requirement:

Material and condition:
  Grade, governing material specification and required supply or core condition.
  Requirement:

Treated surfaces:
  Mark the working surfaces and the start and end of each treated zone on the drawing.
  Requirement:

Surface hardness:
  Required range, hardness scale, test method and measurement locations.
  Requirement:

Hardening depth:
  Required value, units, depth definition, acceptance criterion and measurement method.
  Requirement:

Other acceptance checks:
  Core properties, final dimensions, surface finish and any specified crack checks.
  Requirement:

INSPECTION
Required dimensional / material / hardness / depth records:
Additional testing, acceptance criteria and sampling basis:

ENQUIRY
Company:
Contact:
Email:
Message and open questions:

Send the available information to sales@rockvanta.com or use the website RFQ form.
This checklist records requirements; it does not set tolerances or prescribe repairs.